The Cost of Ambulatory Breast Reduction: Hospital Reimbursement Versus Surgeon Payments.

Introduction: Reduction mammoplasty (RM) is one of the most common operations performed in plastic surgery. While US national surgical expenditures have risen in recent years, studies have reported decreasing reimbursement rates for plastic surgeons. The purpose of this study is to characterize the trends in charges and payments for a common plastic surgery operation, ambulatory RM, for facilities and physicians. Methods: A Medicare patient records database was used to capture hospital, surgeon, and anesthesiologist charges and payments for ambulatory RM from 2005 to 2014. Values were adjusted for inflation. A ratio of hospital to surgeon charges and payments were calculated: charge multiplier (CM) and payment multiplier (PM), respectively. Charges, payments, Charlson comorbidity index, CM, and PM values were analyzed for trends. Results: This study included 1001 patients. During the study period, the facility charge for RM per patient increased from $8477 to $11,102 (31% increase; p < .0005), and the surgeon charge increased from $7088 to $7199 (2% increase; p = .0009). Facility payments increased from $3661 to $3930 (7% increase; p < .0005), and surgeon payments decreased from $1178 to $1002 (15% decrease; p < .0005). CM increased from 1.2 to 1.54, and PM increased from 3.11 to 3.92. Conclusions: Charges and payments to facilities for ambulatory RM increased disproportionately to that of surgeons, likely due in part to rising administrative costs in health care delivery. This may disincentivize plastic surgeons from offering RM at hospital-based surgical centers, limiting patient access to this operation.

Introduction: La mammoplastie de réduction (MR) est l'une des interventions les plus courantes pratiquées en chirurgie plastique. Alors que les dépenses chirurgicales aux États-Unis ont augmenté au niveau national au cours des dernières années, les études ont signalé une diminution des taux de remboursement pour les chirurgiens plasticiens. L'objectif de cette étude est de définir les tendances dans les frais et paiements pour une intervention courante de chirurgie plastique, une MR ambulatoire, pour les établissements et pour les médecins. Méthodes: Une base de données des dossiers de patients Medicare a été utilisée pour collecter les frais pour les hôpitaux, les chirurgiens et les anesthésiologistes ainsi que les paiements pour MR ambulatoires de 2005 à 2014. Les valeurs ont été ajustées pour tenir compte de l'inflation. Des ratios des frais hôpital/chirurgien et des paiements ont été calculés : respectivement, un facteur de multiplication des frais (MF) et des paiements (MP). Les tendances de la valeur des frais, des paiements, de l'indice de comorbidité de Charlson, du MF et du MP ont été analysées. Résultats: Cette étude a inclus 1001 patients. Au cours de la période de l'étude, les frais pour MR par patient à la charge de l'établissement ont augmenté de 8 477 $ à 11 102 $, soit une augmentation de 31 % (P < 0,0005) et les frais du chirurgien sont passés de 7 088 $ à 7 199 $, soit une augmentation de 2 % (P = 0,0009). Les paiements de l'établissement ont augmenté de 3 661 $ à 3 930 $, soit une augmentation de 7 % (P < 0,0005) et les paiements du chirurgien ont diminué de 1 178 $ à 1 002 $, soit une diminution de 15 % (P < 0,0005). Le facteur MF est passé de 1,2 à 1,54 et le facteur MP est passé de 3,11 à 3,92. Conclusions: Les frais et paiements aux établissements pour MR ambulatoire ont augmenté de manière disproportionnée par rapport à ceux des chirurgiens, probablement en partie à cause de l'augmentation des coûts administratifs croissants de l'administration des soins. Cela pourrait inciter les chirurgiens plasticiens à ne plus offrir de MR dans les centres chirurgicaux hospitaliers et pourrait donc limiter l'accès des patients à cette opération.

Determinants of pressure injury development in patients with COVID-19.

OBJECTIVE: Pressure injuries (PIs) often develop in critically ill patients due to immobility, and underlying comorbidities that decrease tissue perfusion and wound healing capacity. This study sought to provide epidemiological data on determinants and current managements practices of PI in patients with COVID-19. METHOD: A US national insurance-based database consisting of patients with coronavirus or COVID-19 diagnoses was used for data collection. Patients were filtered by International Classification of Diseases (ICD) codes corresponding to coronavirus or COVID-19 diagnosis between 2019-2020. Diagnosis of PI following COVID-19 diagnosis was queried. Demographic data and comorbidity information was compared. Logistic regression analysis was used to determine predictors for both PI development and likelihood of operative debridement. RESULTS: A total of 1,477,851 patients with COVID-19 were identified. Of these, 15,613 (1.06%) subsequently developed a PI, and 8074 (51.7%) of these patients had an intensive care unit (ICU) admission. The average and median time between diagnosis of COVID-19 and PI was 39.4 and 26 days, respectively. PI was more likely to occur in patients with COVID-19 with: diabetes (odds ratio (OR): 1.39, 95% confidence interval (CI): 1.29-1.49; p<0.001); coronary artery disease (OR: 1.11, 95% CI: 1.04-1.18, p=0.002), hypertension (OR: 1.43, 95% CI: 1.26-1.64; p<0.001); chronic kidney disease (OR: 1.18, 95% CI: 1.10-1.26; p<0.001); depression (OR: 1.45, 95% CI 1.36-1.54; p<0.001); and long-term non-steroidal anti-inflammatory drug use (OR: 1.21, 95% CI: 1.05-1.40; p=0.007). They were also more likely in critically ill patients admitted to the ICU (OR: 1.40, 95% CI: 1.31-1.48; p<0.001); and patients requiring vasopressors (OR:1.25, 95% CI: 1.13-1.38; p<0.001), intubation (OR: 1.21, 95% CI 1.07-1.39; p=0.004), or with a diagnosis of sepsis (OR: 2.38, 95% CI 2.22-2.55; p<0.001). ICU admission, sepsis, buttock and lower back PI along with increasing Charlson Comorbidity Index (CCI) (OR: 1.04, 95% CI 1.00-1.08; p=0.043) was associated with surgical debridement. The vast majority of patients with COVID-19 did not undergo operative debridement or wound coverage. CONCLUSION: PIs are widely prevalent in patients with COVID-19, especially in those who are critically ill, yet the vast majority do not undergo operative procedures. DECLARATION OF INTEREST: The authors have no conflicts of interest to declare.

Measurement Matters: MRI Analysis of Differing Anatomic Measurement Techniques for Velar Length and the Velopharyngeal Needs Ratio.

Background: Advances in imaging tools provide opportunities to enhance how velopharyngeal (VP) variables are quantified to facilitate surgical decisions. The purpose of this study was to use magnetic resonance imaging (MRI) to determine if quantitative differences were present between measures of linear and curvilinear velar length, and subsequently, the VP needs ratio. Methods: Data were prospectively collected from patients presenting with repaired cleft palate and/or congenital palatal insufficiency with or without VPI at a single center tertiary children's hospital. Quantitative measures of the velopharynx using a novel nonsedated MRI protocol were obtained. Paired samples t tests were conducted to assess if differences were present between the VP needs ratio and measurements of linear and curvilinear velar length at rest and during sustained phonation. Intraclass correlation coefficients were calculated to assess intra/inter-rater reliability. Results: Significant differences were present between measurements of linear and curvilinear velar length at rest (P ≤ 0.001) and during sustained phonation (P ≤ 0.001). Significant differences were also present in the VP needs ratio (P ≤ 0.001). Curvilinear velar length at rest and during sustained phonation was longer than that of linear velar length at rest and during sustained phonation. No significant differences were observed between measures of effective velar length (P = 0.393). Conclusions: Measurement differences influence the VP needs ratio. This may have implications for comparisons to previously reported normative reference values and for those who are anatomically at risk for VPI. MRI provides an enhanced imaging modality to assess normative benchmarks and the anatomic variables used to define VP anatomy for clinical decision-making.

Feeding Outcomes After Mandibular Distraction for Airway Obstruction in Infants.

Robin sequence is a congenital issue resulting in airway obstruction, difficulty feeding, and failure to thrive. Mandibular Distraction Osteogenesis is used to improve airway obstruction in these patients, but little data exists characterizing feeding outcomes following surgery. This study aims to evaluate feeding outcomes and weight gain following mandibular distraction for airway correction in infants. A single-center retrospective chart review was conducted, and patients under 12 months old who underwent mandibular distraction between December 2015 and July 2021 were included in the study. The presence of cleft palate, distance of distraction, and polysomnography results were recorded. The primary outcomes were the length of distraction, need for nasogastric tube or G-tube at discharge, time lapsed to achieve full oral feeds, and weight gain (kilogram). Ten patients met the criteria. Of those 10 patients, 4 were syndromic, 7 had a cleft palate, and 4 had a congenital cardiac diagnosis. The average length of stay postsurgery was 28 days. Eight patients achieved full oral feeds in an average of 65.6 days. Five patients required nasogastric tube or G-tube at discharge, with 3 of these patients later transitioning to full oral feeds. All patients gained weight 3 months postsurgery with an average of 0.521 kg/mo. Patients who achieved full oral feeds gained an average of 0.549 kg/mo. Patients with supplementation gained an average of 0.454 kg/mo. All patients demonstrated improvement in airway obstruction with an average postoperative apnea hypopnea index of 1.64. Further investigation is necessary to identify challenges seen in feeding after mandibular distraction osteogenesis and improve care.

Intraoperative Fluorescence Angiography in Implant-Based Breast Reconstruction: Identifying Risk Factors and Outcomes.

BACKGROUND: Intraoperative fluorescence angiography (FA) has been described as a useful adjunct to physical examination in predicting mastectomy skin flap viability for immediate breast reconstruction. Its use has been described as a screening tool for mastectomy skin flap viability as well as a test used only for patients at high risk for mastectomy skin flap loss. We performed a national database review of implant-based breast reconstruction surgeries to determine the practice patterns of FA in this patient cohort and to determine if this technology impacted clinical outcomes. METHODS: A national insurance claims database was reviewed to select patients having undergone direct-to-implant (DTI) and immediate tissue expander (TE) placement with and without intraoperative FA as well as patients who had FA at the time of mastectomy without reconstruction. Patient characteristics that prompted FA and postoperative outcomes with and without FA were evaluated to determine its clinical impact in the observed practice pattern. RESULTS: Of the 48,464 patients identified, 836 had FA. More than twice as many patients undergoing DTI had FA than patients undergoing immediate TE placement (10.4% vs 5%, P < 0.0001). Twelve percent of patients receiving FA at the time of mastectomy had reconstruction delayed. Fluorescence angiography was associated with a trend toward lower overall complication rates in DTI patients (8.0% vs 11.9% without FA) but a significantly higher overall complication rate with immediate TE placement (13.8% vs 10.5% without FA, P = 0.018) and was associated with higher reoperation (12.0% vs 8.3% without FA, P = 0.037) in the TE group. There was no difference in other individual complications, readmission, or explantation for either clinical group with and without FA. Regression analysis identified obesity (odds ratio, 1.32; P < 0.001) and younger age (odds ratio, 1.74; P < 0.001) to be associated with performing FA, whereas obesity, diabetes, and tobacco use were associated with higher complication rates. CONCLUSIONS: Younger and otherwise healthier obese patients were more likely to have FA. A greater proportion of DTI patients had FA than TE patients with improved outcomes in the former group and worse outcomes in the latter group. Obesity, tobacco use, and diabetes were associated with worse outcomes, whereas only obesity was associated with FA use.

Local estrogen for nonsurgical recontouring of auricular cartilage.

INTRODUCTION: 5% of children are born with auricular deformities. Permanent recontouring can be achieved through splinting during early infancy. Beyond this time, splinting is ineffective, and patients require surgical correction. Neonatal cartilage malleability is hypothesized to be secondary to retained maternal estrogens, increasing hyaluronic acid concentration. In this article, we evaluate the efficacy of local estrogen treatments for the nonsurgical recontouring of mature auricular cartilage. METHODS: Ears of New Zealand rabbits were folded and splinted and then were randomly assigned to an experimental group, n = 10 (injected estrogen, topical estrogen, saline, or untreated). Treatment ears received injected estrogen or saline twice weekly or topical estrogen daily for 4 weeks. Two weeks post-treatment, splints were removed, and ear angles were measured. Biopsies were taken for histologic and mechanical analysis, and systemic estrogen levels were assayed. RESULTS: Ear angles stabilized by 9 days post-splinting. Topical estrogen led to a significantly smaller resting angle (121.6° ± 13.5°) compared with saline and control (135.9° ± 11.2° and 145.3° ± 13.0°, respectively). Injected estrogen led to the most pronounced angle decrease (64.5° ± 35.3°). Ears injected with estrogen also showed a significant increase in cartilage thickness. Hyaluronic acid concentration was increased in both estrogen treatment groups compared with saline. At 3 weeks post-treatment, there was no significant differences in the elastic modulus of the cartilage or serum estrogen levels among the groups. CONCLUSION: Results show the potential result of local estrogen treatment to achieve a stable nonsurgical remodeling of mature auricular cartilage. Further study is needed to evaluate the molecular mechanism and improve the transdermal estrogen delivery to optimize treatment regimen.

Pediatric Cranial Defects: What Size Warrants Repair?

PURPOSE: Identifying which cranial defects among children warrant surgical repair is integral to providing adequate protection of the skull whereas minimizing exposure to surgical complications. This review examines the available evidence regarding the role of defect size in determining the appropriateness of nonsurgical versus surgical management. METHODS: An electronic literature review was performed using PubMed and Google Scholar to identify publications that provided rationales for nonsurgical management of cranial defects in the pediatric population based on size. Titles and abstracts were reviewed by the authors to determine eligibility for full-text analysis. Ineligible studies were categorized and relevant data from fully analyzed texts were recorded. RESULTS: Of the 523 articles that were reviewed, 500 were ineligible for full-text analysis due to the following most common reasons: no cranial defect described (227, 45%), did not discuss management of cranial defects (68, 14%), or surgery was performed on all defects in evaluation of a technique or protocol (86, 17%). Ten publications provided relevant data. The suggested size below which surgery was not recommended varied widely between articles. Beyond the age of 1 to 2 years, no general agreement on recommended management in children was found. Craniofacial surgeons had divergent views on the minimum diameter for a "critical" defect and the size for which surgical repair is necessary. CONCLUSIONS: Little guidance or consensus exists regarding the indications for surgical correction of cranial defects based on the size of the defect. Objective data is needed to classify "clinically critical defects" in the pediatric population.

The mechanical and microstructural properties of the pediatric skull.

The pediatric skull differs drastically from the adult skull in terms of composition, rigidity, and structure. However, there is limited data which quantifies the mechanical properties of the pediatric skull. The lack of mechanical data may inhibit desired pediatric craniofacial surgical outcomes as current methodologies and materials employed for the pediatric population are adapted from those used for adults. In this study, normally discarded parietal bone tissue from eight pediatric craniosynostosis surgery patients (aged 4 to 10 months) was collected during reconstructive surgery and prepared for microstructural analysis and mechanical testing. Up to 12 individual coupon samples of fresh, never frozen tissue were harvested from each specimen and prepared for four-point bending testing to failure. The microstructure of each sample was analyzed using micro-computed tomography before and after each mechanical test. From this analysis, effective geometric and mechanical properties were determined for each sample (n = 68). Test results demonstrated that the pediatric parietal skull was 2.0 mm (±0.4) thick, with a porosity of 36% (±14). The effective modulus of the tissue samples, determined from the initial slope of the sample stress-strain response using Euler beam theory and a nonlinear Ramberg-Osgood stress-strain relationship, was 4.2 GPa (±2.1), which was approximately three times less stiff than adult skull tissue reported in the literature. Furthermore, the pediatric skull was able to bend up to flexural failure strains of 6.7% (±2.0), which was approximately five times larger than failure strains measured in adult skull. The disparity between the measured mechanical properties of pediatric skull tissue and adult skull tissue points towards the need to reevaluate current surgical technologies, such as pediatric cranial surgical hardware, so that they are more compatible with pediatric tissue.

Three-dimensional printing and craniosynostosis surgery.

OVERVIEW: The goal of this study was to review the current application and status of three-dimensional printing for craniosynostosis surgery. METHODS: A literature review was performed using the PubMed/MEDLINE databases for studies published between 2010 and 2020. All studies demonstrating the utilization of three-dimensional printing for craniosynostosis surgery were included. RESULTS: A total of 15 studies were ultimately selected. This includes studies demonstrating novel three-dimensional simulation and printing workflows, studies utilizing three-dimensional printing for surgical simulation, as well as case reports describing prior experiences. CONCLUSION: The incorporation of three-dimensional printing into the domain of craniosynostosis surgery has many potential benefits. This includes streamlining surgical planning, developing patient-specific template guides, enhancing residency training, as well as aiding in patient counseling. However, the current state of the literature remains in the validation stage. Further study with larger case series, direct comparisons with control groups, and prolonged follow-up times is necessary before more widespread implementation is justified.

The Impact of Palatal Fistulae on the Success of Alveolar Bone Grafting.

ABSTRACT: Palatal fistulae are common complications of cleft palate surgery with a frequency of 5% to 29% and are challenging to repair. Optimal timing to repair palatal fistulae, in a staged fashion before alveolar bone grafting, or at the same time, still remains controversial. The primary aim of this study is to compare outcomes of 2 groups with regard to successful alveolar bone grafting in patients with cleft lip and palate and palatal fistulae. We describe a review of 85 consecutive patients identified as undergoing bone grafting from a single institution craniofacial team during 2003 to 2018. Twenty-eight required palatal fistula repair. All patients had a diagnosis of unilateral or bilateral complete cleft lip and palate. Patients with cleft lip and palate repairs were stratified based on preoperative or simultaneous palatal fistula repair. Panoramic radiographs were reviewed by 2 physicians to evaluate success of bone grafting. Comparison between cohorts was made by statistical analysis. Of the 28 that required palatal fistula repair, 15 (53.6%) patients underwent prebone grafting palatal fistula repair and 13 (46.4%) patients underwent simultaneous bone grafting with palatal fistula repair. Mean age at time of bone grafting and palatal fistula repair were 10.60 years old and 9.39 years old, respectively. Length to follow-up was 54.82 months. The average height of the healed alveolar cleft site for patients in the prebone grafting or simultaneous groups was 10.57 mm and 11.46 mm, respectively. Patients who underwent palatal fistula repair and simultaneous bone grafting had similar outcomes as those with palatal fistula repair preoperatively.

Three-Dimensional-Printed Temporal Mandibular Joint for Use in Mandibular Distraction for Patients With Craniofacial Microsomia.

The objective of this study is to validate the proof of concept of a 3-dimensional (3D)-printed temporal mandibular joint (TMJ) for use in mandibular distraction in patients with severe craniofacial microsomia (CFM). Patients with Pruzansky-Kaban IIB and III have severe condylar dysplasia and abnormal or absent TMJs, often resulting in upper airway obstruction during infancy. As these patients progress, they require subsequent surgeries to correct facial asymmetry and TMJ function. While studies have shown promising outcomes with costochondral grafting or mandibular distraction without a TMJ in the setting of patients with Pruzansky-Kaban IIB and III it is often unsuccessful in avoiding tracheostomy during infancy. Using an adult head and neck cadaver, the right condylar head was removed to emulate a Pruzansky-Kaban III mandible. A 3D model of an adult skull was obtained. The 3D TMJ was replaced into the cadaver and KLS distractor applied in the vertical orientation. The authors achieved adequate distraction using a 3D-printed TMJ. The 3D structure developed here can potentially be used for clinical application in CFM patients with absent or rudimentary TMJ for distraction and further avoidance of the need for tracheostomy for airway obstruction.

Modeling Medical Education: The Impact of Three-Dimensional Printed Models on Medical Student Education in Plastic Surgery.

PURPOSE: Trainee exposure to craniofacial pathology can be limited due to rare disease presentation, revealing a need for tools that assist in visualizing complex 3D pathologic anatomy. 3D-printed models show potential as a useful aid, allowing for physical manipulation and hands-on experience. This study investigates their educational value in teaching craniofacial pathology and surgical repair. METHODS: Forty-four medical students randomly assigned to a control group or model group were given a PowerPoint presentation-based module on craniosynostosis and surgical repair. The model group was also provided with 3D-printed models of sagittal, metopic, and bicoronal synostosis, created using patient-specific preoperative computed tomography data. A survey using the Likert scale evaluated participants' learning experience. Pre- and postmodule scores on a 10-question multiple choice quiz were recorded. RESULTS: The survey showed that students in the model group reported better understanding of the anatomy (4.86 ±â€Š0.15 versus 4.26 ±â€Š0.22; P = 0.0001) and visualization of the pathology (4.76 ±â€Š0.23 versus 4.26 ±â€Š0.25; P = 0.0064), gaining an improved understanding of surgical approach (4.38 ±â€Š0.37 versus 3.83 ±â€Š0.29; P = 0.0266), which was more effectively taught (4.24 ±â€Š0.33 versus 3.30 ±â€Š0.38; P = 0.0007) with the 3D-printed models. The mean pre- and post-module quiz scores between groups were similar. CONCLUSION: 3D-printed models demonstrated an improved learning experience for medical students as shown by survey. These findings suggest a potential use for 3D-printed models in medical education of craniofacial pathology and surgery.

Unilateral Cranialization as an Approach for Posterior Table Frontal Sinus Fractures.

Management of posterior table fractures has seen a conservative shift in recent years. Patients who present with CSF leak may be safely monitored, while cranialization is reserved for patients with severe comminuted or displaced posterior table fractures. We report the case of a 20-year-old patient with a comminuted, displaced posterior table fracture that was missing a central segment and was associated with dural injury. The septum and contralateral sinus were unaffected, thus warranting unilateral cranialization. This is a reported case of hemicranialization, which falls on the spectrum of a conservative approach. At 12 months post-op, the patient has not experienced any complications historically associated with cranialization including persistent CSF leak, meningitis, wound infection, alopecia or facial nerve injury at the site of surgery.

The Use of Patient-Specific Three-Dimensional Printed Surgical Models Enhances Plastic Surgery Resident Education in Craniofacial Surgery.

PURPOSE: A significant challenge in surgical education is to provide a meaningful hands-on experience with the pathology the trainee will see in independent practice. Craniofacial anatomy is challenging and unfamiliar to the learner. METHODS: Using preoperative computed tomography data, the authors produced an accurately sized, three-dimensional (3D) printed model of the congenital craniofacial anatomy of patients treated by the same attending surgeon-PGY4 resident surgeon pair over the course of a 6-month rotation. A preoperative stepwise surgical plan was written by the attending and resident, and the plan was marked on the 3D model by the attending and resident separately. The written and marked plans were measured for accuracy and time to completion. The resident surgeon's applicable milestone levels were assessed. RESULTS: Seven congenital craniofacial anomalies met criteria for inclusion: 4 craniosynostosis cases, 2 mandibular distractions, and 1 LeFort I distraction. The number of inaccuracies of the written plan improved from 5 to 0 for sagittal synostosis and 4 to 0 for mandibular distraction. The time to complete the written plan decreased by 22% for sagittal synostosis and 45% for mandibular distraction. The number of inaccuracies of the marked plan decreased from 5 to 0 for sagittal synostosis and 2 to 0 for mandibular distraction. Time to completion of the marked plan decreased by 76% for sagittal synostosis and 50% for mandibular distraction. Milestone scores increased an average of 1.875 levels. CONCLUSION: Three-dimensional printed craniofacial models are a positive addition to resident training and have been objectively quantified to improve the accuracy and time to completion of the surgical plan as well as progression in the plastic surgery milestones.

Third Molar Eruption and Hardware Fungal Infection Following Treatment of Mandibular Angle Fracture.

Appropriate management of lower 3rd molars is crucial to successful treatment of mandibular angle fractures. A unique case of a patient who presented for initial management of a left mandibular angle fracture with an unerupted lower 3rd molar was discussed in this study. After treatment with open reduction and internal fixation of the fracture, the lower 3rd molar erupted and the patient subsequently developed fungal osteomyelitis and hardware failure. This was successfully treated with hardware removal, maxillomandibular fixation, and combined use of an intravenous antibiotic and oral antifungal.

A Technique for Preoperative Estimation of Resection Weight in Vertical Reduction Mammoplasty Using 2 Breast-Specific Surface Measurements.

Insurance authorization of reduction mammoplasty can be a challenging process. Despite copious evidence of the benefits of this operation and evidence that specimen weight does not correlate with symptomatic relief, most insurance providers require estimated resection weights. Many formulas and techniques to predict resection weight are inconsistent or not specific to the vertical technique. This study describes a simple method for generating a surgeon-specific equation for accurately predicting vertical reduction mammoplasty resection weight using 2 breast surface measurements.

Unilateral Orticochea Pharyngoplasty for Unilateral Velopharyngeal Dysfunction: Long-Term Outcomes Data.

A unilateral deficit in velopharyngeal closure during speech production is an unusual presentation of velopharyngeal dysfunction (VPD) and few solutions have been described for this problem. This report details the long-term outcomes using this technique. We performed a retrospective chart review of all the patients who underwent a unilateral Orticochea pharyngoplasty for VPD. The authors identified 10 patients treated with 11 unilateral pharyngoplasty at a single tertiary care institutional setting. The mean age at repair was 8.6 years. The mean length of follow-up was 7.6 years. All the patients demonstrated improvement in velopharyngeal closure and speech resonance with 4 showing complete resolution of VPD. There were no revisions required or complications. One patient, after 10.7 years, required a unilateral procedure on the contralateral side which resulted in complete resolution of VPD postoperatively.

Computer Simulation and Optimization of Cranial Vault Distraction.

OBJECTIVE: The objective of this study was to validate the proof of concept of a computer-simulated cranial distraction, demonstrating accurate shape and end volume. DESIGN: Detailed modeling was performed on pre- and postoperative computed tomographic (CT) scans to generate accurate measurements of intracranial volume. Additionally, digital distraction simulations were performed on the preoperative scan and the resultant intracranial volume and shape were evaluated. SETTING: Tertiary Children's Hospital. PATIENTS, PARTICIPANTS: Preoperative and postoperative CT images were used from 10 patients having undergone cranial distraction for cephalocranial disproportion. INTERVENTIONS: None; computer simulation. MAIN OUTCOME MEASURE: Computer simulation feasibility of cranial vault distraction was demonstrated through creation of digital osteotomies, simulating distraction through translating skull segments, followed by simulated consolidation. Accuracy of the model was evaluated through comparing the intracranial volumes of actual and simulated distracted skulls. RESULTS: The developed digital distraction simulation was performed on the CT images of 10 patients. Plotting the relationship between the actual and simulated postdistraction volumes for the 10 patients yielded a slope of 1.0 and a correlation coefficient of 0.99. The average actual resultant volume change from distraction was 77.0 mL, compared to a simulated volume change of 76.9 mL. CONCLUSIONS: Digital simulation of cranial distraction was demonstrated through manipulation of the CT images and confirmed by comparing the actual to simulated volume change. This process may provide objective data in designing an individual distraction plan to optimize volume expansion and resultant cranial shape as well as patient education.

Avoidance of Tracheostomy Using Mandibular Distraction in an Infant With Severe Condylar Dysplasia and Airway Obstruction.

Craniofacial microsomia (CFM) is a common craniofacial anomaly characterized by asymmetric malformation of the mandible, ear, and other structures including the upper airway. The degree of mandibular hypoplasia is classified using a scheme developed by Pruzansky and modified by Kaban. Severe condylar dysplasia is the hallmark of Pruzansky-Kaban types IIB and III. Distraction osteogenesis has emerged as a treatment modality for mandibular hypoplasia in this setting for the treatment of asymmetry and airway obstruction. However, its use to resolve upper airway obstruction and avoid tracheostomy in infants with types IIB and III is not reported in the literature. The authors present a patient with successful distraction osteogenesis in a patient with CFM resulting in a Pruzansky IIB micrognathia. The authors achieved resolution of upper airway obstruction and avoidance of tracheostomy.